Concrete sealers protect concrete surfaces against external factors that can cause damage to the material. These sealers can be oil-based or water-based www.projectconcrete.com.au. Water-based sealants are easier to use and are also less expensive. The concrete sealer acts as a thin protective layer over concrete; however, the sealer does not penetrate into the concrete itself. Hence, once the concrete has been coated, any liquid or other substances that may enter the concrete through manual or mechanical means will not be affected.
Outdoor Concrete Sealer
There are two types of concrete sealer available; the first is the oil-based concrete sealer and the second is the water-based concrete sealer Jacksonville Concrete and Construction. Oil-based sealers dry to a matte finish and they leave a fine, somewhat glossy, residue on the concrete. Water-based sealants dry to a very oily finish and they provide an almost photographic glossy appearance on concrete. You can use either type for sealing concrete; however, it is recommended that you use oil-based products during the wet season and water-based products during the dry season.
If you have concrete surfaces at your place, you should consider sealing them using an outdoor concrete sealer. This type of sealing provides a protective coating over concrete surfaces for a longer period of time than other sealing methods. Sealers that are used outdoors are more resistant to ultraviolet light damage and to stains caused by acid rain and snow. An outdoor sealer may be used on patios, driveways, sidewalks and ramps; however, before you start sealing your exterior surfaces, it is important that you first check with your local building department to ensure that the sealer is approved for use in your area. An outdoor sealer may be the perfect solution for your concrete surfaces; however, if you do not know how to apply the sealer, you may end up damaging your surface instead of protecting it.